Multiplex Core M-Link and Powerbox Core

[StefanAnnette]

G'day all,

We copied the below explanation from the Multiplex page;

Radio transmission
There are two 2.4GHz transmission systems available with the CORE-M-LINK!
On the one hand, the M-LINK transmission system on the other hand, the CORE system. When binding the receivers, the customer thus has the choice of whether an M-Link receiver or a PowerBox receiver should be bound!

Does this mean that both systems are integrated into the one transmitter and the type of receiver to be bound either a Powerbox Rx or M-Link Rx, are selected via a switch or program file within the transmitter ??
OR
Are separate transmitters required ??

Many regards to all,

Stay safe and well.

Stefan & Annette Karotkavitch

[Schwintz]

Hi,
the Core-TX with M-Link offers both. When You're going to bind a receiver to the Core, You can choose one of the systems. If You already have a model with a M-Link-receiver, You just select M-Link on the Core and bind it. Than You make the fine-tuning with the regular Core-software. For new models I would suggest to use Powerbox components. They give You more options for telemetry. And You will have two HF-antennas in the Core for the Powerbox P2Bus. This is an additional safety-feature. But, to be honest with You, I never had any issues with the single M-Link module.

Tom

[StefanAnnette]

G'day Tom,
Many thank's.
Apologies for our delay in answering. We have been offline.
Regards,
Stefan & Annette