Can Weatronic 2,4 GHz work with Mpx Royal MC?

[Viljo56]

Can anyone help me with this problem? I tried to install my Weatronic 2.4 GHz module in Royal MC but it does not work. It is no problem to use Weatronic in my Royal Modul. Both transmitters talk PPM , so maybe it should work in Royal MC as well, or is it something I miss?
Can it matter that the transmitters use different frequency bands in the original version, Royal Modul is 35 MHz and Royal MC is 40 MHz.
The advantage of using Weatronic is that I can set, for example, servo travel, endpoints, failsafe via the Giga Control configuration program.

[PeterStegemann]

The Royal MC support PCM and PPM. Make sure it is set to PPM, I'm pretty sure Weatronic does not support PCM.

[Viljo56]

Hello Peter.
I have set up it for PPM. The original 40 MHz-sendermodule works with both PPM and PCM receivers.
The Weatronic 2,4 GHz works perfecly on all my TX, Royal Pro/SX, P4000, Royal Modul.
Here pictures of the Weatronic module-connector.

[profimc]

Hello!

The ROYAL mc will work with the WEATRONIC-Module but - as said before - only with the PPM-signal. That is not a feature of the 40-MHz-Module but of the main electronic unit of the ROYAL mc. The right hand switch or the left switchboard has to be set to PPM.

good luck
profimc

[Viljo56]

Thank you for trying to help. I have set it up for ppm, see picture.

[profimc]

Hi!

Corrcet - now the WEATRONIC-module should work!

w/r
profimc

[Viljo56]

Unfortunately, I do not make it work. I have almost given up but will try a little more. Remember that I jumper pins 2 and 5 when I converted a Royal Pro for the first time with Jeti TU module, What if I remove the resistor on the Weatronic module connector? I'm grabbing straws now, as perhaps the last resort ...
Would love to make the Weatronic module work, would be worth gold.

[Viljo56]

Now my Royal MC is working with Weatronic 2,4 GHz and I am very happy. The solution was to solder a 10K resistor to the Weatronic module connector. I got the tip from a model pilot, k_wimmer at https://www.rc-network.de/threads/can-weatronic-2-4-ghz-dv4-module-work-with-multiplex-royal-mc.11821600/
I will upload a picture of my soldering of the 10K resistor on the module connector when I have improved the soldering. I I just have to bow and thank for the help from a model aviator friend and I am very grateful for the help.
/Ville

[Viljo56]

Here you can see the extra 10k resistor in place.

/Ville