Wingstabi 7 - vector thrust

Johan 2017-07-23 18:54:19 UTC #1

Maybe some of you guys can help me out quick.
I fly a mirage 2000 with vector thrust on the turbine exhaust. The plane has 2 elevons servo's , one up and down vector thrust servo and one vector thrust left right servo. Now I have 2 G3 multi gyro's, one for the elevons in dampening mode for regular flight, and one for the vector thrust in heading hold mode to hoover the plane. Can I change the 2 G3 multi gyro's by 1 wingstabi 7?
The problem I now have is that I can not combine the dampening up-down function from the elevons with the heading hold up-down from the vector thrust in 1 gyro. I also would like to have dampening left- right vector thrust without up down vector movement.
Would the wingstabi 7 be able to ?

Regards Johan

FrankS 2017-07-23 20:21:50 UTC #2

You can have multiple servo outputs on the "Wingstabi", for instance on one of mine I have two elevator servos and on another rudder and nose wheel steering (controlled by the rudder stick). Plus even if you use a Wingstabi 7 you can use all 7 outputs for servos and then higher channel inputs for flight phase, gyro gain and trim (if your transmitter supports this)

Johan 2017-07-23 20:30:41 UTC #3

Thank you FrankS,
So you can set the nosewheel in headinghold and the rudder in dampening mode at the same time controlled by 1 stick ?

FrankS 2017-07-24 07:30:38 UTC #4

No, you can only adjust each gyro, so each output on a common input is on the same gyro settings for the selected mode.

Johan 2017-07-24 07:55:28 UTC #5

So If I use 2 different channels for one stick this would be possible?
And can these 2 channels rotate round the same gyro ax with different gyro values?

FrankS 2017-07-24 21:10:09 UTC #6

As far as I am aware, you can only adjust the settings for each axis for each flight phase.

Steffen 2017-07-25 00:07:44 UTC #7

Hi,
its only possible to apply gyro-control values per axis - its not possible to mix dampening and headinghold on one axis

But you have 4 switchable gyro-phases - so you can use off, 2 modes for normal flight and one phase for hovering.

Its possible to disable vector servos per gyrp-phase. So you can disable vector servos in the normal flight phases

Regards Steffen

Johan 2017-07-25 11:59:12 UTC #8

And this can be combined with elevon mix?
Or can the elevon mix be set on-off in the different gyro phases, so the vector thakes over?

Basiert auf Discourse, funktioniert am besten mit aktiviertem JavaScript