Digiadjusters as controllers

[FrankS]

For adjusting the gain in gyros in different flight modes, it would be useful if the "digiadjusters" could be assigned as the input to a gain control channel. Or allow a fixed value per flight phase that way a "digiadjuster" could be used to set gyro gain in each flight phase.

[AndreasJ]

At the profi tx this is already possible...
You have to assign a control with fixed value in the setup, name and function menu. Aftee that you can assign it as servo and setup the digi adjuster in the control menu for the value.

[FrankS]

Thank you, that did the trick but I had to adjust the servo curve as the "digi-adjuster" only allows adjustment on one side.

[AndreasJ]

Then just play with the servo curves to about two points to -100%, the third to +100% .... Maybe reversed....